Support profile covering the sides/edges of the oven. Mounted to the vertical GOLA profiles 8023/8024.

External connector used for 90° connections of two GOLA 8006 profiles.

Kit of rear brackets for vertical Gola profiles. The kit consists of 2 metal brackets + bolts. These metal brackets are sold separately in addition to CF.0148.

The rear bracket set is recommended to be used as a support set for the side panel (to hang). In this case, these rear metal brackets must be applied additionally in horizontal position (see the video below).

A set of fixing brackets for vertical L-form 8023 GOLA profile: 4 plactic brackets for a front edge and 3 (consisting of 2 parts) metal brackets for fixing the profile to a rear part of the cabinet.

Space (metal) brackets installation video:

A set of fixing brackets for vertical U-form 8024 GOLA profile: 4 plactic brackets for a front edge and 3 (consisting of 2 parts) metal brackets for fixing the profile to a rear part of the cabinet.

Space (metal) brackets installation video:

Vertical snap-on GOLA profile 8023 for 18 mm thick side panels of kitchen furniture “with no handles”.

The new fixing system for vertical GOLA profiles allows them to be fixed to the front of the unit with brackets, thus avoiding the use of visible screws inside the unit.
Profiles snap onto the brackets by means of a pronged system.

The strengths of this new patented GOLA profile system include easy cleaning inside the unit, fast and simple assembly and the option of quickly replacing any damaged profiles.

„Clean“ (after removing the ends – aluminum racking marks) GOLA profile‘s L-4600 length – 4500 mm.

„Clean“ (after removing the ends – aluminum racking marks) GOLA profile‘s L-2670 length – 2590 mm.

We sell only in bars, however we can cut those bars to your required lengths.

The recommended parts, which can go together with GOLA 8023 profile:

CF-0148 – a set of fixing parts for GOLA 8023 profile.

Intermediate vertical snap-on GOLA profile 8024 for 18 mm thick panels of kitchen furniture “with no handles”.

The new fixing system for vertical GOLA profiles allows them to be fixed to the front of the unit with brackets, thus avoiding the use of visible screws inside the unit.
Profiles snap onto the brackets by means of a pronged system.

The strengths of this new patented GOLA profile system include easy cleaning inside the unit, fast and simple assembly and the option of quickly replacing any damaged profiles.

„Clean“ (after removing the ends – aluminum racking marks) GOLA profile‘s L-4600 length – 4500 mm.

„Clean“ (after removing the ends – aluminum racking marks) GOLA profile‘s L-2670 length – 2590 mm.

We sell only in bars, however we can cut those bars to your required lengths.

The recommended parts, which can go together with GOLA 8024 profile:

CF-0149 – a set of fixing parts for GOLA 8024 profile.

90° internal corner for GOLA 8006 profiles connection.

Mechanical fastener for Gola Channel (8006) and Catenaria Crossbar (6588). Quick and easy application. No need for screws or drilling. Applies to assembled cabinets, even with mounted top.

End caps for GOLA 8007 profiles (2 pcs set: left + right).

TGCSP0160/TGPA8007 – universal external end cap. Plastic.
FGCSP0161/TGPC8007 – universal internal end cap. Plastic.

End caps for 8006 profiles (2 pcs set: left + right).

TGCSP0158/TGPA8006 – end cap covering only the endings of GOLA 8006 profile.
TGPC8006 – end cap fully (up to the door edge) covering GOLA 8006 profile.

Screw fixing quick support for 8006/8007 “Gola” profiles (2 pcs in a set).

Gola horizontal aluminum spacer channel profile R1730 is an ideal choice for wall units (upper cabinet). Panel thickness – 18mm.

We sell only in bars, however we can cut those bars to your required lengths.

Crossbar “Catenaria” aluminum profile is used to strengthen a furniture base. Cabinets built with aluminum crossbars are extremely durable, stronger and provide easier and safer handling as well as giving a modern flair. Easy to manage: bars are to be cut to size and plastic accessories are designed to complete the assembly.

Can be fixed at both the frontal and in the rear part of the cabinet.

The profile’s width x height – 19×35 mm.

We sell only in bars, however we can cut those bars to your required lengths.

CSP0120-06SF – closing cap with dowels for “Catenaria” crossbar R6588, black;

CSP0121-01SF – plate for the fixing of the “catenaria” crossbar R6588 to the worktop, transparent;

6588TP01 – joint-caps for 6588 “catenaria” crossbar (L+R in a set) frame assembly. Quick and easy application. No need for screws or drilling. Cut to size customization possible even for already assembled cabinets. Suitable for thin top or glass. Ideal for special applications with hobs and sinks;

CSP0149-01SF – mechanical fastener for Gola 8006 channel and Catenaria 6588 crossbar. Quick and easy application. No need for screws or drilling. Applies to assembled cabinets, even with mounted top. Provides fastening to the countertop.

Horizontal aluminum spacer channel profile GOLA for base cabinets.

GOLA 8007 profiles are designed to achieve different aesthetic results combining the modern look of the aluminium with a classic recessed handle or a 45° cut door, utilizing the same cut on the cabinets as for the C shape.

Innovative design, easier to clean. Safety feature – no handles exceeding the doors.

„Clean“ (after removing the ends – aluminum racking marks) GOLA profile‘s length – 4000 mm.

We sell only in bars, however we can cut those bars to your required lengths.

SU116DS59 – pins fixing quick support for 8007/8006 “Gola” profiles (2 units set).

TGCSP0160 or FGCSP0161/TGPC8007– opened or closed aluminium end cap for  “Gola” 8007 profiles (2 units set – L+R).

Horizontal undertop GOLA profile for modern/contemporary kitchen furniture. This aluminum spacer gives “no handles” look. Gola channel profile for base cabinet lets implement aestetic innovative constructional furniture solutions.

„Clean“ (after removing the ends – aluminum racking marks) GOLA profile‘s length – 4000 mm.

We sell only in bars, however we can cut those bars to your required lengths.

The recommended parts, which can go together with GOLA 8006 profile:

SU116DS59 – pins fixing quick support for 8007/8006 “Gola” profiles (2 units set);

TGCSP0158 or FGCSP0159/TGPC8006– opened aluminium end cap for  “Gola” 8006 profiles (2 units set – L+R);

AG8006 – 90° internal corner for GOLA 8006;

SG8006 – 90° external corner for GOLA 8006;

CSP0149-01SF – mechanical fastener for Gola 8006 channel and Catenaria 6588 crossbar. Quick and easy application. No need for screws or drilling. Applies to assembled cabinets, even with mounted top.