Aesthetically looking shelf support with rubber ring and bushing for glass shelves. Application – for panel/plate. Also, these supports may be installed into metal/aluminum profiles just a thread needs to be made inside the profile (the bushing is not needed in this case).

Esthetically looking glass shelf support pins (installation – to panel).

Connecting screws with a flat head and essential design, ideal for joining furniture in a discreet and safe way. For 18-19 mm thick panels. 2-Pieces with Sleeve and Combi Slot.

Headed threaded insert. For any type of a furniture panel.

Self-threading joined expansion nylon bushes. For the stronger furniture fittings installation (wood screw Ø3,5-4) to chipboard or MDF. We sell in packs of 100 pcs only.

BLU is the revolutionary concealed connecting system. BLU makes it possible to assemble furniture easily and quickly. Where before multiple elements were needed to connect furniture parts, with BLU, only one element, it is Pick & Fix. BLU-12 can be used with panels of thicknesses 16 mm, 18 mm, 20 mm, 23 mm, 25 mm, 28 mm and 30 mm, BLU-8 – with panels of thicknesses 12 mm, 14 mm, 15 mm and 16 mm.

The only visible hole is 6 mm, instead of the 12-15 mm hole characteristic of the traditional set composed by connecting fitting and dowel.

More information about BLU 

Product video:

Support profile covering the sides/edges of the oven. Mounted to the vertical GOLA profiles 8023/8024.

Suitable for very thin panels – starting from 10 mm. thick. The corresponding bolts, threaded dowel, insert and cover cap we sell separately.

Shelf support with a pin for wood/MDF shelves. We only sell by packs (1 pack = 100 pcs). In nickel finish.

Plate for fixing “Catenaria” crossbar R6588 to the worktop.

Closing cap with dowels for R6588 “Catenaria” profile.

Left and Right (2 pcs in a set) joint-caps for 6588 “Catenaria” crossbar frame assembly.

Quick and easy application. No need for screws or drilling.
Cut to size customization possible even for already assembled cabinets.

Suitable for thin top or glass. Ideal for special applications with hobs and sinks.

Mechanical fastener for Gola Channel (8006) and Catenaria Crossbar (6588). Quick and easy application. No need for screws or drilling. Applies to assembled cabinets, even with mounted top.

Adjustable door straighteners – door adjusters – are needed to avoid bending on both sliding and swinging doors. This is a fully recessed, cuttable version, which means that the bar can be trimed up to 420mm from the original length. Adjustments are done from either the top or bottom of the door via an allen key.
Minimum thickness of the panel is 18-20 mm.
Centre distance: min. 1200 mm – max. 2800 mm.

Crossbar “Catenaria” aluminum profile is used to strengthen a furniture base. Cabinets built with aluminum crossbars are extremely durable, stronger and provide easier and safer handling as well as giving a modern flair. Easy to manage: bars are to be cut to size and plastic accessories are designed to complete the assembly.

Can be fixed at both the frontal and in the rear part of the cabinet.

The profile’s width x height – 19×35 mm.

We sell only in bars, however we can cut those bars to your required lengths.

CSP0120-06SF – closing cap with dowels for “Catenaria” crossbar R6588, black;

CSP0121-01SF – plate for the fixing of the “catenaria” crossbar R6588 to the worktop, transparent;

6588TP01 – joint-caps for 6588 “catenaria” crossbar (L+R in a set) frame assembly. Quick and easy application. No need for screws or drilling. Cut to size customization possible even for already assembled cabinets. Suitable for thin top or glass. Ideal for special applications with hobs and sinks;

CSP0149-01SF – mechanical fastener for Gola 8006 channel and Catenaria 6588 crossbar. Quick and easy application. No need for screws or drilling. Applies to assembled cabinets, even with mounted top. Provides fastening to the countertop.

The mounting installation requires a minimum panel thickness of 18 mm.

Use the wall-mounting drill hole template for drilling the holes in the wall in concrete.

Installation video of the same series support:

These hanging brackets are adjustable in two directions: height adjustment with allen key 3 accessible from above and lateral adjustment. Anti-release device. Thickness only 5 mm.

Video instruction for cabinet instalation:

Headed hex drive with blade-like self tapping external thread designed to reduce installation forces into harder materials.

Available in zinc plated, length – 12,5 mm.

Suitable for 18 mm. thick panels. The corresponding bolts, threaded dowel, insert and cover cap we sell separately. OM.P.T150.08.07 – cover cap D8.

Assembly/Instruction  video:

Suitable for 12 mm. and 18 mm. thick panels. The corresponding bolts, threaded dowel, insert and cover cap we sell separately.

Assembly/Instruction video:

The reduced sizes improve the aesthetic impact. Allows the application of structural connecting fittings even on panels with reduced thickness.

Assembly/Instruction video:

Hole cover caps D5 and D8 to secure braces, adjustable legs, the open spaces in buttom panels, etc.

Squared shelf supports, with no sucker. We only sell by packs (1 pack = 100 pcs). In nickel finish.

Easy and confortable mounting – more fluent and time-saving collection of a furniture. Completely retractable once installed.

Mounting video:

Shelf bush with an integrated anti-release system, which can be operated from both sides – from above and below. The through hole allows the passage of an hex-key no.4. The minimum thickness of the panel – 18 mm.

Adjustable shelf support of 150 mm. length, mounted into 25 mm panel.

Double adjustments:
“a” horizhontal andvertical
“b” inclination
“c” possiblity to insert a grain for anti-drop system.
We suggest to adjust by locating the shelf upon the supports, and insert it after the adjustments

Mounting video of the same type shelf support:

Glass shelf supports with suckers. We only sell by packs (1 pack = 100 pcs). In nickel finish.

Zinc plated metal oven bearing. Oven bottom support bracket.

It’s a latch-type Panel Connector (2 pieces) for front assembly. Reduced dimensions, holes (32 mm) for euro-screws. Quick fastener for connecting two panels.